Cookies for Santa Plate

I have not posted in awhile. I have been busy with getting ready for baby and with being in charge of our women's craft day at our church. The craft day is finally over and I will be posting a few of the things we made. The first is this Cookies for Santa plate. This project was a hit. We made them with plates from the dollar store and vinyl lettering. Once the lettering is applied, the plate is no longer dishwasher or microwave safe and should be cleaned only with a damp cloth - but hey, for a plate you use once a year - I figure that is fine. Anyway, I was pleased with how they turned out and the ladies loved them.

**If you are interested in purchasing the vinyl to make a plate for yourself, I am selling the vinyl only in my etsy shop. The cost is $1.00 for the vinyl and 50 cents for shipping.**

How to Apply Vinyl Lettering

I have a vinyl lettering business, and I am often asked for instructions on how to apply vinyl lettering to a wall, or other surface. I decided that it would be a good idea to post these instructions, so that if I am unable to just hand over an instruction sheet, I can refer people here and they will have access to my tips.

How to Apply Vinyl Lettering

1. Be sure that you are applying to a clean, dry surface. Dust, wax, oil, etc. will all prevent the vinyl from adhering well.
2. Mark your wall or object with a pencil, or other removable medium to ensure correct placement.
3. Slowly remove the lettering from the backing. The vinyl should remain on the application tape. If not, press the backing back into place and rub firmly - then try again.
4. Hold the vinyl in position and stick. Be extra careful here, once you have put the vinyl in place, there is no going back. You might want to find another person to assist you with this step, especially when applying large pieces of vinyl.
5. Rub the entire area firmly with your hand or even a sharp edge of a ruler or credit card, making sure that all air bubbles are pushed out. The vinyl is pressure sensitive and will adhere better the harder it is rubbed.
6. Slowly peel off the application tape by grabbing the top left corner and pulling downward. Your vinyl lettering should adhere to your surface with no problem. If some does begin to lift off, simply place the application tape back over that area and rub firmly, then continue peeling the tape.

How to Remove Vinyl Lettering

Warm up the vinyl using a blow dryer on low. Carefully peel back the vinyl. Vinyl lettering cannot be used again.

Tips

1. Vinyl lettering will adhere well to most smooth, or semi smooth surfaces. It will not adhere well to rough surfaces, such as heavily textured walls, cinder block, stucco, or unfinished wood.
2. Do not apply the lettering to freshly painted walls. Allow the paint to cure for at least three weeks before applying vinyl.
3. If you need to clean the vinyl lettering, do so with a mild soap and water and non abrasive cloth or sponge. Do not use products containing alcohol or abrasives.
4. Vinyl lettering comes pre-spaced. You can apply it as-is, or get creative and cut and apply it to fit your style.
5. If you find the lettering is resisting pulling away from the paper backing during the application process, it sometimes helps to warm the backing slightly with a blow dryer.

*Vinyl lettering should not damage paint when removed - however, there may be fading issues, depending on where it is placed (i.e. in a sunny location.)